Welcome Welcome to the home page for the Bouncy Castle C# API! Keeping the Bouncy Castle Project Going With various algorithm changes, updates, security issues in protocols, and having to write vendor statements for organisations like CERT, keeping the Bouncy Castle project going is turning into a full time job and several of us have now given up permanent work in order to free up time to work on it. If you are making use of our software, and are interested in making sure we are always here when you need us, there are two principal ways you can help.
- Mailing List Archive: Crypto: Ccm S
- Mailing List Archive: Crypto: Ccm 2016
- Mailing List Archive: Crypto: Ccms
The first is by getting a support contract or by sponsoring specific work on the project. Not only will you get a hot-line to Bouncy Castle developers, consulting time, and release alerts if you need them, but, if you wish, we will also acknowledge your support publicly. You can find out further information on support contracts and consulting at. Secondly, the Bouncy Castle APIs are now formally owned by a registered Australian Charity, the Legion of the Bouncy Castle Inc, ABN 84 166 338 567. Without considering the costs of actually doing what we do, we're also trying to raise money to allow us to get certifications such as FIPs for the APIs.
We can accept donations via PayPal, Bitcoin, or direct transfer. If this sounds more like you, and you want to see this project continue to prosper, please visit our to help. Current feature list:. Generation and parsing of PKCS-12 files. X.509: Generators and parsers for V1 and V3 certificates, V2 CRLs and attribute certificates. PBE algorithms supported by PbeUtilities: PBEwithMD2andDES-CBC, PBEwithMD2andRC2-CBC, PBEwithMD5andDES-CBC, PBEwithMD5andRC2-CBC, PBEwithSHA1andDES-CBC, PBEwithSHA1andRC2-CBC, PBEwithSHA-1and128bitRC4, PBEwithSHA-1and40bitRC4, PBEwithSHA-1and3-keyDESEDE-CBC, PBEwithSHA-1and2-keyDESEDE-CBC, PBEwithSHA-1and128bitRC2-CBC, PBEwithSHA-1and40bitRC2-CBC, PBEwithHmacSHA-1, PBEwithHmacSHA-224, PBEwithHmacSHA-256, PBEwithHmacRIPEMD128, PBEwithHmacRIPEMD160, and PBEwithHmacRIPEMD256.
Feb 18, 2004 - -----Original Message----- From: redhat-ccm-list-admin redhat com. Redhat listings (Crypto class to specify a different algorithm, like IBMSecureRandom. Richard -- Redhat-ccm-list mailing list Redhat-ccm-list redhat com. Gossamer Mailing List Archive. * cipher/Makefile.am: Add 'rijndael-armv-aarch64-ce.S'. * cipher/rijndael-armv8-aarch64-ce.S: New.
Signature algorithms supported by SignerUtilities: MD2withRSA, MD4withRSA, MD5withRSA, RIPEMD128withRSA, RIPEMD160withECDSA, RIPEMD160withRSA, RIPEMD256withRSA, SHA-1withRSA, SHA-224withRSA, SHA-256withRSAandMGF1, SHA-384withRSAandMGF1, SHA-512withRSAandMGF1, SHA-1withDSA, and SHA-1withECDSA. Symmetric key algorithms: AES, Blowfish, Camellia, CAST5, CAST6, ChaCha, DES, DESede, GOST28147, HC-128, HC-256, IDEA, ISAAC, Noekeon, RC2, RC4, RC5-32, RC5-64, RC6, Rijndael, Salsa20, SEED, Serpent, Skipjack, TEA/XTEA, Threefish, Tnepres, Twofish, VMPC and XSalsa20.
Symmetric key modes: CBC, CFB, CTS, GOFB, OFB, OpenPGPCFB, and SIC (or CTR). Symmetric key paddings: ISO10126d2, ISO7816d4, PKCS-5/7, TBC, X.923, and Zero Byte. Asymmetric key algorithms: ElGamal, DSA, ECDSA, NaccacheStern and RSA (with blinding). Asymmetric key paddings/encodings: ISO9796d1, OAEP, and PKCS-1. AEAD block cipher modes: CCM, EAX, GCM and OCB.
Digests: GOST3411, Keccak, MD2, MD4, MD5, RIPEMD128, RIPEMD160, RIPEMD256, RIPEMD320, SHA-1, SHA-224, SHA-256, SHA-384, SHA-512, SHA3, Tiger, and Whirlpool. XOFs: SHAKE.
Signer mechanisms: DSA, ECDSA, ECGOST3410, ECNR, GOST3410, ISO9796d2, PSS, RSA, X9.31-1998. Key Agreement: Diffie-Hellman, EC-DH, EC-MQV, J-PAKE, SRP-6a. Macs: CBCBlockCipher, CFBBlockCipher, CMAC, GMAC, GOST28147, HMac, ISO9797 Alg. 3, Poly1305, SipHash, SkeinMac, VMPCMAC. PBE generators: PKCS-12, and PKCS-5 - schemes 1 and 2.
OpenPGP (RFC 4880). Cryptographic Message Syntax (CMS, RFC 3852), including streaming API. Online Certificate Status Protocol (OCSP, RFC 2560). Time Stamp Protocol (TSP, RFC 3161).
TLS/DTLS client/server up to version 1.2, with support for the most common ciphersuites and extensions, and many less common ones. Non-blocking API available. Elliptic Curve Cryptography: support for generic F2m and Fp curves, high-performance custom implementations for many standardized curves. Reading/writing of PEM files, including RSA and DSA keys, with a variety of encryptions.
PKIX certificate path validation Software produced by this site is covered by the and was made possible with the help of the following. If you are interested in sponsoring work on Bouncy Castle or getting commercial support for this or prior releases please contact us at. Compiled assembly only. Checksums: sha256 b1df51f45b2e289bc8304d08d03e6e7ebfa479f3d9b7ab73abcbb95cac5abf78 Source code, examples, tests, documentation. Checksums: sha256 ba438abe2fb895348865acfc065c750b8dec1f2b95539affab81a4 IMPORTANT. This is the final feature release with support for legacy.NET platforms.
From 1.9.0 we will be targeting more modern.NET frameworks (see and updating our build and packaging systems. The 1.8.x series will continue to receive bug fixes, but limited new functionality. Defects Fixed. Rfc3211WrapEngine would not properly handle messages longer than 127 bytes. This has been fixed. Additional Features and Functionality.
Restrictions on the output sizes of the Blake2b/s digests have been removed. RFC 7748: Higher-level support for X25519 and X448 has been added. RFC 8032: Higher-level support for Ed25519 and Ed448 has been added.
Implementation of the SM4 block cipher has been added. Added support for Plain ECDSA (a.k.a CVC-ECDSA). Additional Notes. See the (cumulative) list of GitHub pull requests that we have accepted at.
Release 1.8.3, 11th August 2018 Compiled assembly only. Checksums: sha256 952ea63604683acfbf1b1b1472cac50e026d4c3e8f5ae967bebaf1 Source code, examples, tests, documentation. Checksums: sha256 22622bbeb7b526d107263f7c573242023c7bd5a8c308135d2b5249 IMPORTANT. In this release, the TLS library has moved to a whitelisting approach for client-side validation of server-presented Diffie-Hellman (DH) parameters. In the default configuration, if a ciphersuite using ephemeral DH is selected by the server, the client will abort the handshake if the proposed DH group is not one of those specified in RFC 3526 or RFC 7919, or if the DH prime is 2.32-1 range. Some confusion over the parameters J and L in connection with Diffie-Hellman has been resolved.
Added CryptoApiRandomGenerator, a wrapper for RNGCryptoServiceProvider. Added VMPC stream cipher, VMPCMAC and a VMPC-based implementation of IRandomGenerator. Added support in OpenPGP for fetching keyrings by case-insensitive user ID #BMA-8. Fixed a vulnerability of CMS signatures that do not use signed attributes (Bleichenbacher RSA forgery). Fixed a bug causing second and later encrypted objects to be ignored in KeyBasedFileProcessor example. Fixed case-sensitivity issue with deletion from a PKCS#12 file. Fixed problem overwriting entities in a PKCS#12 file.
Fixed PgpUtilities.MakeKeyFromPassPhrase for 8-bit characters #BMA-13. Fixed duplicate certificate problem in Pkcs12Store.Save #BMA-12. Fixed NAnt build under Mono #BMA-10. Fixed BigInteger.ModPow for negative exponents #BMA-7. Release 1.2, 5th July 2007 Release includes the full lightweight API, as well as APIs for OpenPGP, CMS, TLS, X.509, and PKCS#12. Compiled assembly only. Checksums: md5 7141ba8bc0ee0ab1251abf sha1 5318cc1e2f523d5e5e1cac6f597ad5 Source code, examples, tests, documentation.
Checksums: md5 bc2bb75a4227f30ba0ff1c sha1 09d0931d8c54075d19c130eb6082444deac9394b Changes in this release:. Source now builds on.NET Compact Framework 1.0 (compilation flag NETCF10). Release assembly now signed with a strong name. Added CCM and EAX block cipher modes. Added Noekeon block cipher. Added HC-128, HC-256, and ISAAC stream ciphers. Added RIPEMD160withECDSA signature algorithm.
Added support for notation data signature subpackets to OpenPGP. Added support for parsing of experimental signatures to OpenPGP. Added the complete set of SEC-2 EC curves.
Added support for implicit tagging to DerApplicationSpecific. Added remaining ASN.1 structures from RFC 3126 to Asn1.Esf namespace. Performance of ECDSA improved.
Performance of ASN.1 stream parsing improved. Fixed default private key length for Diffie-Hellman parameters. Fixed DerT61String to correctly support 8-bit characters. Fixed duplicate attribute problem in Pkcs12Store.Save. Fixed a problem writing public keys in OpenPGP #BMA-5. Release 1.1, 4th May 2007 Release includes the full lightweight API, as well as APIs for OpenPGP, CMS, X.509, and PKCS#12. Compiled assembly only.
Checksums: md5 083ed774b70c2d5f39aab47966855b45 sha1 5c0ffa6a661bf28e3eb577a3ea0a2ab69dcbd354 Source code, examples, tests, documentation. Checksums: md5 0795d7939b2fd982fc3dbd sha1 3a252c379879ee5fbd389e7134a8aef20b9e74ea Changes in this release:. Added support for writing DSA private keys, and more encodings, in OpenSsl (PemReader/PemWriter). Removed SharpZipLib dependency. Added RSA blinded signature classes.
Added Asn1.IsisMtt namespace (ISIS-MTT ASN.1 classes). Added SEED block cipher engine. Added Salsa20 stream cipher engine. Performance optimisations for F2m elliptic curves. Fixed OpenPGP bug decrypting files with multiple types of encryption on the session key. Release 1.0, 19th January 2007 Release includes the full lightweight API, as well as APIs for OpenPGP, CMS, X.509, and PKCS#12.
Compiled assembly only ( is required, but not included). Checksums: md5 d1ab2bcfce6fb1b03b9a42a36ee171b0 sha1 3a545c220e79a5b2115bfc4c31a5a805965e4c8f Source code, examples, tests, documentation. Checksums: md5 ab75e0d50fc8dbea84a9297a574b03cf sha1 bd5caf2a7c13e071e2191c747301d5 Release 0.0, 13th October 2003 The original C# port: - note: the original port is now well out of date, we strongly recommend migrating to the official release stream, apart from anything BigInteger is substantially faster and the new release supports OpenPGP, PKCS#12, CMS, and TSP as well. MD5 checksum 3d95c79f6d5c68f64d33e0 Patch, 22 Nov 2004: (Only required for the original C# port) Fix to prevent BigInteger prime generation in original port from going into an infinite loop. Follow us on: News Release 1.8.4 is now available for download. Saturday 27th October 2018 Full support has been added for RFC 7748 (X25519 and X448) as well as RFC 8032 (Ed25519 and Ed448). Support for Plain ECDSA and the SM4 block cipher has also been added.
Restrictions on sizing of Blake2b/s digests have been removed, and an issue preventing handling of messages longer than 127 bytes in the Rfc3211WrapEngine has been fixed. Please see the for further details. Release 1.8.3 is now available for download. Saturday 11th August 2018 SHA-3 performance is further improved. Low level implementations have been added for RFC 7748 (X25519 and X448) as well as RFC 8032 (Ed25519 and Ed448). The TLS librbary has moved to a whitelisting approach for client-side validation with server-presented Diffie-Hellman parameters. Please see the for further details.
Release 1.8.2 is now available for download. Monday 9th April 2018 Contains an important EC math fix and many minor fixes and improvements, as well as several new algorithms, including BCrypt, BLAKE2b/2s, GOST R and DSTU-7564. Please see the for further details. C#.NET FIPS Release 1.0.1 is now available for download.
Thursday 24th November 2016 Our first C#.NET FIPS release, certified for CLR 4 is now available at our. The APIs have been tested on.NET 4.6.1, and.NET 4.5.2. Release 1.8.1 Monday 28th December 2015 This release is largely a security release, with extra validation now added to the (D)TLS 1.2 implementation to validate the signature algorithm in Digitally Signed structures. The release also fixes issues with DTLS record-layer version handling and adds support for ASN.1 GraphicString and VideotexString.
Please see the for further details. Release 1.8.0 Sunday 22nd November 2015 This release adds support for a range of new algorithms and protocols, including SHA-3, deterministic DSA/ECDSA, client and server side TLS/DTLS 1.2 support, SipHash, and X9.31 and NIST SP 800-90A DRGBs.
RFC 6637 ECDSA and ECDH has been added to the OpenPGP API and the TSP API now supports generation of certIDs with digests other than SHA-1. Performance improvements have been made in a number of areas including BigInteger.ModPow, prime generation, and EC computations over many of the NIST and SEC elliptic curves.
Other enhancements and bug fixes have also been made. Finally the Serpent implementation now conforms to the NESSIE test vectors as published, and the previous version of Serpent has been made available as Tnepres. Please see the for further details. Release 1.7 Thursday 7th April 2011 This release adds client authentication to the TLS package, in addition to compression and ECC cipher suites. The library can now also be built for Silverlight (2.0 and above) and support classes have been added for the ASN.1 structures in CRMF (RFC 4211) and CMP (RFC 4210). See the for further details.
Archive for dev-crypto-csharp. Wednesday 28th June 2006 See the C#.
Sponsored Links.
Hello All, I have an 2801 connected to a Hicom 330 PBX through a ISDN PRI QSIG with MGCP and a CCM5.0. I´m having a lot of problems to get the gateway registration on CCM. I would like to do some questions: 1- Is it possible to put an ISDN PRI with MGCP using QSIG signaling? Using the show isdn status command I´m seeing MULTIPLEFRAMEESTABILISHED I´m seeing too with the show ccm-manager that the MGCP is Active but I´m not able to see this Gateway into the active state inside of CCM. I´m using a VWIC-1MFT-E1 card to use this ISDN PRI.
2- Is it possible to put the IP Address instead of Domain Name when I´m creating the 2801 Gateway? Hey guys, I really need your help to solve this registration problem, I kindly ask a hand into this situation.
Thanks for everything. It follows below the configuration on the Gateway: hostname GW2801! Boot-start-marker boot system flash c2801-adventerprisek9-mz.124-6.T3.bin boot-end-marker! Logging buffered 4096 informational enable secret 5.!
No aaa new-model! Resource policy! Clock timezone UTC -3 network-clock-participate wic 2 network-clock-select 1 E1 0/2/0 ip cef!!!! Ip tcp synwait-time 13 no ip domain lookup ip domain name test.br ip name-server. ip name-server.
ip name-server.! Isdn switch-type primary-qsig isdn logging! Voice-card 0 dsp services dspfarm!! Voice call carrier capacity active!! Voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 bytes 40!!!
Voice class h323 1 h225 timeout tcp establish 3! Crypto configuration! Controller E1 0/2/0 framing NO-CRC4 line-termination 75-ohm pri-group timeslots 1-31 service mgcp!!
Interface FastEthernet0/0 ip address. speed 100 full-duplex no cdp enable h323-gateway voip bind srcaddr.! Interface FastEthernet0/1 no ip address shutdown duplex auto speed auto no cdp enable! Interface Serial0/1/0 no ip address shutdown clock rate 2000000 no cdp enable! Interface Serial0/2/0:15 no ip address no ip proxy-arp encapsulation hdlc isdn switch-type primary-qsig isdn overlap-receiving isdn incoming-voice voice isdn supp-service name calling isdn bind-l3 ccm-manager isdn negotiate-bchan isdn bchan-number-order ascending isdn sending-complete no cdp enable! Ip route 0.0.0.0 0.0.0.0.!!
Ip http server ip http secure-server! Logging.
access-list 1 permit. access-list 1 permit. dialer-list 1 protocol ip permit snmp-server community voip RW 1 snmp-server community ext0399 RW 1 snmp-server community sw0399 RW 1 disable-eadi no cdp run! Voice-port 0/2/0:15!
Ccm-manager mgcp ccm-manager music-on-hold ccm-manager config server. ccm-manager config! Mgcp mgcp call-agent. 2427 service-type mgcp version 0.1 mgcp dtmf-relay voip codec all mode out-of-band mgcp rtp unreachable timeout 1000 action notify mgcp modem passthrough voip mode nse mgcp package-capability rtp-package no mgcp package-capability res-package mgcp package-capability sst-package no mgcp package-capability fxr-package mgcp package-capability pre-package no mgcp timer receive-rtcp mgcp sdp simple mgcp fax t38 inhibit mgcp rtp payload-type g726r16 static! Mgcp profile default!!
Dial-peer cor custom!!! Dial-peer voice 1 pots service mgcpapp port 0/2/0:15!!!
Line con 0 exec-timeout 0 0 password 7. logging synchronous login line aux 0 exec-timeout 0 0 password 7. logging synchronous login line vty 0 4 exec-timeout 0 0 password 7. logging synchronous login! Scheduler allocate ntp clock-period 17180079 ntp server.! Webvpn context Defaultcontext ssl authenticate verify all! No inservice end.
In CCM, you need to setup the gateway name as: GW2801.test.br This is your hostname and your ip domain name. There is no other method.
When you say it is 'active' on the gateway, that doesn't correspond to what it should say. If you do a: show ccm you should see it say primary and registered. And then on CCM, click on show endpoints and you should see a 'registered with.' Jonathan On 2/28/07, alsvrj wrote: Hello AllI have an 2801 connected to a Hicom 330 PBX through a ISDN PRI QSIG with MGCP and a CCM5.0. I´m having a lot of problems to get the gateway registration on CCM. I would like to do some questions: 1- Is it possible to put an ISDN PRI with MGCP using QSIG signaling? Using the show isdn status command I´m seeing MULTIPLEFRAMEESTABILISHED I´m seeing too with the show ccm-manager that the MGCP is Active but I´m not able to see this Gateway into the active state inside of CCM.
I´m using a VWIC-1MFT-E1 card to use this ISDN PRI. 2- Is it possible to put the IP Address instead of Domain Name when I´m creating the 2801 Gateway?
Hey guys, I really need your help to solve this registration problem, I kindly ask a hand into this situation. Thanks for everything. It follows below the configuration on the Gateway: hostname GW2801 ! boot-start-marker boot system flash c2801-adventerprisek9-mz.124-6.T3.bin boot-end-marker !
logging buffered 4096 informational enable secret 5. ! no aaa new-model ! resource policy ! clock timezone UTC -3 network-clock-participate wic 2 network-clock-select 1 E1 0/2/0 ip cef !
ip tcp synwait-time 13 no ip domain lookup ip domain name test.br ip name-server. ip name-server. ip name-server.
! isdn switch-type primary-qsig isdn logging ! voice-card 0 dsp services dspfarm !
voice call carrier capacity active ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 bytes 40 ! voice class h323 1 h225 timeout tcp establish 3 ! crypto configuration ! controller E1 0/2/0 framing NO-CRC4 line-termination 75-ohm pri-group timeslots 1-31 service mgcp ! interface FastEthernet0/0 ip address. speed 100 full-duplex no cdp enable h323-gateway voip bind srcaddr.
! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto no cdp enable ! interface Serial0/1/0 no ip address shutdown clock rate 2000000 no cdp enable ! interface Serial0/2/0:15 no ip address no ip proxy-arp encapsulation hdlc isdn switch-type primary-qsig isdn overlap-receiving isdn incoming-voice voice isdn supp-service name calling isdn bind-l3 ccm-manager isdn negotiate-bchan isdn bchan-number-order ascending isdn sending-complete no cdp enable ! ip route 0.0.0.0 0.0.0.0.
! ip http server ip http secure-server ! logging.
access-list 1 permit. access-list 1 permit.
dialer-list 1 protocol ip permit snmp-server community voip RW 1 snmp-server community ext0399 RW 1 snmp-server community sw0399 RW 1 disable-eadi no cdp run ! control-plane ! voice-port 0/2/0:15 ! ccm-manager mgcp ccm-manager music-on-hold ccm-manager config server.
ccm-manager config ! mgcp mgcp call-agent. 2427 service-type mgcp version 0.1 mgcp dtmf-relay voip codec all mode out-of-band mgcp rtp unreachable timeout 1000 action notify mgcp modem passthrough voip mode nse mgcp package-capability rtp-package no mgcp package-capability res-package mgcp package-capability sst-package no mgcp package-capability fxr-package mgcp package-capability pre-package no mgcp timer receive-rtcp mgcp sdp simple mgcp fax t38 inhibit mgcp rtp payload-type g726r16 static ! mgcp profile default ! dial-peer cor custom ! dial-peer voice 1 pots service mgcpapp port 0/2/0:15 !
line con 0 exec-timeout 0 0 password 7. logging synchronous login line aux 0 exec-timeout 0 0 password 7. logging synchronous login line vty 0 4 exec-timeout 0 0 password 7. logging synchronous login ! scheduler allocate ntp clock-period 17180079 ntp server. ! webvpn context Defaultcontext ssl authenticate verify all !
no inservice end cisco-voip mailing list cisco-voip@puck.nether.net. Hi, Maybe you can disble ip domain name and use only IP address in CCM and Gateway, with sh ccm you must see the registration. On 3/2/07, Jonathan Charles wrote: In CCM, you need to setup the gateway name as: GW2801.test.br This is your hostname and your ip domain name. There is no other method. When you say it is 'active' on the gateway, that doesn't correspond to what it should say. If you do a: show ccm you should see it say primary and registered.
And then on CCM, click on show endpoints and you should see a 'registered with.' Jonathan On 2/28/07, alsvrj wrote: Hello AllI have an 2801 connected to a Hicom 330 PBX through a ISDN PRI QSIG with MGCP and a CCM5.0.
I´m having a lot of problems to get the gateway registration on CCM. I would like to do some questions: 1- Is it possible to put an ISDN PRI with MGCP using QSIG signaling? Using the show isdn status command I´m seeing MULTIPLEFRAMEESTABILISHED I´m seeing too with the show ccm-manager that the MGCP is Active but I´m not able to see this Gateway into the active state inside of CCM. I´m using a VWIC-1MFT-E1 card to use this ISDN PRI. 2- Is it possible to put the IP Address instead of Domain Name when I´m creating the 2801 Gateway? Hey guys, I really need your help to solve this registration problem, I kindly ask a hand into this situation. Thanks for everything.
It follows below the configuration on the Gateway: hostname GW2801 ! boot-start-marker boot system flash c2801-adventerprisek9-mz.124-6.T3.bin boot-end-marker ! logging buffered 4096 informational enable secret 5. ! no aaa new-model !
resource policy ! clock timezone UTC -3 network-clock-participate wic 2 network-clock-select 1 E1 0/2/0 ip cef ! ip tcp synwait-time 13 no ip domain lookup ip domain name test.br ip name-server. ip name-server. ip name-server. !
isdn switch-type primary-qsig isdn logging ! voice-card 0 dsp services dspfarm ! voice call carrier capacity active !
voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 bytes 40 ! voice class h323 1 h225 timeout tcp establish 3 ! crypto configuration !
controller E1 0/2/0 framing NO-CRC4 line-termination 75-ohm pri-group timeslots 1-31 service mgcp ! interface FastEthernet0/0 ip address. speed 100 full-duplex no cdp enable h323-gateway voip bind srcaddr. ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto no cdp enable ! interface Serial0/1/0 no ip address shutdown clock rate 2000000 no cdp enable ! interface Serial0/2/0:15 no ip address no ip proxy-arp encapsulation hdlc isdn switch-type primary-qsig isdn overlap-receiving isdn incoming-voice voice isdn supp-service name calling isdn bind-l3 ccm-manager isdn negotiate-bchan isdn bchan-number-order ascending isdn sending-complete no cdp enable !
ip route 0.0.0.0 0.0.0.0. ! ip http server ip http secure-server ! logging. access-list 1 permit.
access-list 1 permit. dialer-list 1 protocol ip permit snmp-server community voip RW 1 snmp-server community ext0399 RW 1 snmp-server community sw0399 RW 1 disable-eadi no cdp run ! control-plane !
voice-port 0/2/0:15 ! ccm-manager mgcp ccm-manager music-on-hold ccm-manager config server. ccm-manager config !
mgcp mgcp call-agent. 2427 service-type mgcp version 0.1 mgcp dtmf-relay voip codec all mode out-of-band mgcp rtp unreachable timeout 1000 action notify mgcp modem passthrough voip mode nse mgcp package-capability rtp-package no mgcp package-capability res-package mgcp package-capability sst-package no mgcp package-capability fxr-package mgcp package-capability pre-package no mgcp timer receive-rtcp mgcp sdp simple mgcp fax t38 inhibit mgcp rtp payload-type g726r16 static ! mgcp profile default !
Mailing List Archive: Crypto: Ccm S
dial-peer cor custom ! dial-peer voice 1 pots service mgcpapp port 0/2/0:15 ! line con 0 exec-timeout 0 0 password 7.
logging synchronous login line aux 0 exec-timeout 0 0 password 7. logging synchronous login line vty 0 4 exec-timeout 0 0 password 7. logging synchronous login ! scheduler allocate ntp clock-period 17180079 ntp server. !
webvpn context Defaultcontext ssl authenticate verify all ! no inservice end cisco-voip mailing list cisco-voip@puck.nether.net cisco-voip mailing list cisco-voip@puck.nether.net - Omar E.P.T - Certified Networking Professionals make better Connections! Usysnet Corp Open Source Solutions www.usysnet.com.pe. No, it has to be by name. CCM has no idea where the gateway is.
The gateway initiates the registration process and tries to register with CCM using its hostname + domain name (make the hostname the IP and that would work). So, CCM must be configured with what the gateway is going to try to register with. Jonathan On 3/2/07, omar parihuana wrote: HiMaybe you can disble ip domain name and use only IP address in CCM and Gatewaywith sh ccm you must see the registration.
On 3/2/07, Jonathan Charles wrote: In CCM, you need to setup the gateway name as: GW2801.test.br This is your hostname and your ip domain name. There is no other method. When you say it is 'active' on the gateway, that doesn't correspond to what it should say. If you do a: show ccm you should see it say primary and registered.
And then on CCM, click on show endpoints and you should see a 'registered with.' Jonathan On 2/28/07, alsvrj wrote: Hello AllI have an 2801 connected to a Hicom 330 PBX through a ISDN PRI QSIG with MGCP and a CCM5.0. I´m having a lot of problems to get the gateway registration on CCM. I would like to do some questions: 1- Is it possible to put an ISDN PRI with MGCP using QSIG signaling? Using the show isdn status command I´m seeing MULTIPLEFRAMEESTABILISHED I´m seeing too with the show ccm-manager that the MGCP is Active but I´m not able to see this Gateway into the active state inside of CCM. I´m using a VWIC-1MFT-E1 card to use this ISDN PRI. 2- Is it possible to put the IP Address instead of Domain Name when I´m creating the 2801 Gateway?
Hey guys, I really need your help to solve this registration problemI kindly ask a hand into this situation. Thanks for everything. It follows below the configuration on the Gateway: hostname GW2801 ! boot-start-marker boot system flash c2801-adventerprisek9-mz.124-6.T3.bin boot-end-marker ! logging buffered 4096 informational enable secret 5.
! no aaa new-model ! resource policy ! clock timezone UTC -3 network-clock-participate wic 2 network-clock-select 1 E1 0/2/0 ip cef ! ip tcp synwait-time 13 no ip domain lookup ip domain name test.br ip name-server. ip name-server. ip name-server.
! isdn switch-type primary-qsig isdn logging ! voice-card 0 dsp services dspfarm ! voice call carrier capacity active ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 bytes 40 ! voice class h323 1 h225 timeout tcp establish 3 !
crypto configuration ! controller E1 0/2/0 framing NO-CRC4 line-termination 75-ohm pri-group timeslots 1-31 service mgcp ! interface FastEthernet0/0 ip address. speed 100 full-duplex no cdp enable h323-gateway voip bind srcaddr.
! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto no cdp enable ! interface Serial0/1/0 no ip address shutdown clock rate 2000000 no cdp enable ! interface Serial0/2/0:15 no ip address no ip proxy-arp encapsulation hdlc isdn switch-type primary-qsig isdn overlap-receiving isdn incoming-voice voice isdn supp-service name calling isdn bind-l3 ccm-manager isdn negotiate-bchan isdn bchan-number-order ascending isdn sending-complete no cdp enable !
ip route 0.0.0.0 0.0.0.0. ! ip http server ip http secure-server ! logging. access-list 1 permit. access-list 1 permit.
dialer-list 1 protocol ip permit snmp-server community voip RW 1 snmp-server community ext0399 RW 1 snmp-server community sw0399 RW 1 disable-eadi no cdp run ! control-plane ! voice-port 0/2/0:15 ! ccm-manager mgcp ccm-manager music-on-hold ccm-manager config server.
ccm-manager config ! mgcp mgcp call-agent. 2427 service-type mgcp version 0.1 mgcp dtmf-relay voip codec all mode out-of-band mgcp rtp unreachable timeout 1000 action notify mgcp modem passthrough voip mode nse mgcp package-capability rtp-package no mgcp package-capability res-package mgcp package-capability sst-package no mgcp package-capability fxr-package mgcp package-capability pre-package no mgcp timer receive-rtcp mgcp sdp simple mgcp fax t38 inhibit mgcp rtp payload-type g726r16 static ! mgcp profile default !
dial-peer cor custom ! dial-peer voice 1 pots service mgcpapp port 0/2/0:15 ! line con 0 exec-timeout 0 0 password 7. logging synchronous login line aux 0 exec-timeout 0 0 password 7. logging synchronous login line vty 0 4 exec-timeout 0 0 password 7. logging synchronous login ! scheduler allocate ntp clock-period 17180079 ntp server.
! webvpn context Defaultcontext ssl authenticate verify all ! no inservice end cisco-voip mailing list cisco-voip@puck.nether.net cisco-voip mailing list cisco-voip@puck.nether.net - Omar E.P.T - Certified Networking Professionals make better Connections! Usysnet Corp Open Source Solutions www.usysnet.com.pe.
Create a name for the gateway in the server's lmhosts and hosts files. From: cisco-voip-bounces@puck.nether.net mailto:cisco-voip-bounces@puck.nether.net On Behalf Of Jonathan Charles Sent: Friday, March 02, 2007 4:34 PM To: omar parihuana Cc: cisco-voip@puck.nether.net Subject: Re: cisco-voip 2801 MGCP Gateway on CCM 5.0 No, it has to be by name. CCM has no idea where the gateway is.
The gateway initiates the registration process and tries to register with CCM using its hostname + domain name (make the hostname the IP and that would work). So, CCM must be configured with what the gateway is going to try to register with. Jonathan On 3/2/07, omar parihuana wrote: Hi, Maybe you can disble ip domain name and use only IP address in CCM and Gateway, with sh ccm you must see the registration. On 3/2/07, Jonathan Charles wrote: In CCM, you need to setup the gateway name as: GW2801.test.br This is your hostname and your ip domain name.
There is no other method. When you say it is 'active' on the gateway, that doesn't correspond to what it should say. If you do a: show ccm you should see it say primary and registered. And then on CCM, click on show endpoints and you should see a 'registered with.' Jonathan On 2/28/07, alsvrj wrote: Hello All, I have an 2801 connected to a Hicom 330 PBX through a ISDN PRI QSIG with MGCP and a CCM5.0. I´m having a lot of problems to get the gateway registration on CCM. I would like to do some questions: 1- Is it possible to put an ISDN PRI with MGCP using QSIG signaling?
Using the show isdn status command I´m seeing MULTIPLEFRAMEESTABILISHED I´m seeing too with the show ccm-manager that the MGCP is Active but I´m not able to see this Gateway into the active state inside of CCM. I´m using a VWIC-1MFT-E1 card to use this ISDN PRI.
2- Is it possible to put the IP Address instead of Domain Name when I´m creating the 2801 Gateway? Hey guys, I really need your help to solve this registration problem, I kindly ask a hand into this situation. Thanks for everything. It follows below the configuration on the Gateway: hostname GW2801! Boot-start-marker boot system flash c2801-adventerprisek9-mz.124-6.T3.bin boot-end-marker! Logging buffered 4096 informational enable secret 5.! No aaa new-model!
Resource policy! Clock timezone UTC -3 network-clock-participate wic 2 network-clock-select 1 E1 0/2/0 ip cef!!!! Ip tcp synwait-time 13 no ip domain lookup ip domain name test.br ip name-server. ip name-server. ip name-server.!
Isdn switch-type primary-qsig isdn logging! Voice-card 0 dsp services dspfarm!! Voice call carrier capacity active!! Voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 bytes 40!!! Voice class h323 1 h225 timeout tcp establish 3!
Crypto configuration! Controller E1 0/2/0 framing NO-CRC4 line-termination 75-ohm pri-group timeslots 1-31 service mgcp!! Interface FastEthernet0/0 ip address. speed 100 full-duplex no cdp enable h323-gateway voip bind srcaddr.! Interface FastEthernet0/1 no ip address shutdown duplex auto speed auto no cdp enable!
Interface Serial0/1/0 no ip address shutdown clock rate 2000000 no cdp enable! Interface Serial0/2/0:15 no ip address no ip proxy-arp encapsulation hdlc isdn switch-type primary-qsig isdn overlap-receiving isdn incoming-voice voice isdn supp-service name calling isdn bind-l3 ccm-manager isdn negotiate-bchan isdn bchan-number-order ascending isdn sending-complete no cdp enable! Ip route 0.0.0.0 0.0.0.0.!!
Ip http server ip http secure-server! Logging. access-list 1 permit. access-list 1 permit. dialer-list 1 protocol ip permit snmp-server community voip RW 1 snmp-server community ext0399 RW 1 snmp-server community sw0399 RW 1 disable-eadi no cdp run! Voice-port 0/2/0:15! Ccm-manager mgcp ccm-manager music-on-hold ccm-manager config server.
ccm-manager config! Mgcp mgcp call-agent. 2427 service-type mgcp version 0.1 mgcp dtmf-relay voip codec all mode out-of-band mgcp rtp unreachable timeout 1000 action notify mgcp modem passthrough voip mode nse mgcp package-capability rtp-package no mgcp package-capability res-package mgcp package-capability sst-package no mgcp package-capability fxr-package mgcp package-capability pre-package no mgcp timer receive-rtcp mgcp sdp simple mgcp fax t38 inhibit mgcp rtp payload-type g726r16 static! Mgcp profile default!! Dial-peer cor custom!!! Dial-peer voice 1 pots service mgcpapp port 0/2/0:15!!! Line con 0 exec-timeout 0 0 password 7.
logging synchronous login line aux 0 exec-timeout 0 0 password 7. logging synchronous login line vty 0 4 exec-timeout 0 0 password 7. logging synchronous login! Scheduler allocate ntp clock-period 17180079 ntp server.! Webvpn context Defaultcontext ssl authenticate verify all! No inservice end cisco-voip mailing list cisco-voip@puck.nether.net cisco-voip mailing list cisco-voip@puck.nether.net - Omar E.P.T - Certified Networking Professionals make better Connections! Usysnet Corp Open Source Solutions www.usysnet.com.pe - Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only.
If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. At no point will the CCM ever try to contact the gateway via that name. Jonathan On 3/2/07, Matt Slaga (US) wrote: Create a name for the gateway in the server's lmhosts and hosts files.From:. cisco-voip-bounces@puck.nether.net mailto: cisco-voip-bounces@puck.nether.net.On Behalf Of.Jonathan Charles.Sent:.
Friday, March 02, 2007 4:34 PM.To:. omar parihuana.Cc:. cisco-voip@puck.nether.net.Subject:.
Re: cisco-voip 2801 MGCP Gateway on CCM 5.0 No, it has to be by name. CCM has no idea where the gateway is. The gateway initiates the registration process and tries to register with CCM using its hostname + domain name (make the hostname the IP and that would work). So, CCM must be configured with what the gateway is going to try to register with.
Jonathan On 3/2/07,.omar parihuana. wrote: HiMaybe you can disble ip domain name and use only IP address in CCM and Gatewaywith sh ccm you must see the registration. On 3/2/07,.Jonathan Charles. wrote: In CCM, you need to setup the gateway name as: GW2801.test.br This is your hostname and your ip domain name. There is no other method. When you say it is 'active' on the gateway, that doesn't correspond to what it should say.
If you do a: show ccm you should see it say primary and registered. And then on CCM, click on show endpoints and you should see a 'registered with.'
Jonathan On 2/28/07,.alsvrj. wrote: Hello AllI have an 2801 connected to a Hicom 330 PBX through a ISDN PRI QSIG with MGCP and a CCM5.0. I´m having a lot of problems to get the gateway registration on CCM. I would like to do some questions: 1- Is it possible to put an ISDN PRI with MGCP using QSIG signaling?
Using the show isdn status command I´m seeing MULTIPLEFRAMEESTABILISHED I´m seeing too with the show ccm-manager that the MGCP is Active but I´m not able to see this Gateway into the active state inside of CCM. I´m using a VWIC-1MFT-E1 card to use this ISDN PRI. 2- Is it possible to put the IP Address instead of Domain Name when I´m creating the 2801 Gateway? Hey guys, I really need your help to solve this registration problem, I kindly ask a hand into this situation. Thanks for everything. It follows below the configuration on the Gateway: hostname GW2801 ! boot-start-marker boot system flash c2801-adventerprisek9-mz.124-6.T3.bin boot-end-marker !
logging buffered 4096 informational enable secret 5. ! no aaa new-model ! resource policy ! clock timezone UTC -3 network-clock-participate wic 2 network-clock-select 1 E1 0/2/0 ip cef !
ip tcp synwait-time 13 no ip domain lookup ip domain name test.br ip name-server. ip name-server. ip name-server.
! isdn switch-type primary-qsig isdn logging ! voice-card 0 dsp services dspfarm !
voice call carrier capacity active ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 bytes 40 ! voice class h323 1 h225 timeout tcp establish 3 ! crypto configuration ! controller E1 0/2/0 framing NO-CRC4 line-termination 75-ohm pri-group timeslots 1-31 service mgcp ! interface FastEthernet0/0 ip address. speed 100 full-duplex no cdp enable h323-gateway voip bind srcaddr.
! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto no cdp enable ! interface Serial0/1/0 no ip address shutdown clock rate 2000000 no cdp enable !
interface Serial0/2/0:15 no ip address no ip proxy-arp encapsulation hdlc isdn switch-type primary-qsig isdn overlap-receiving isdn incoming-voice voice isdn supp-service name calling isdn bind-l3 ccm-manager isdn negotiate-bchan isdn bchan-number-order ascending isdn sending-complete no cdp enable ! ip route 0.0.0.0 0.0.0.0. ! ip http server ip http secure-server ! logging. access-list 1 permit. access-list 1 permit.
dialer-list 1 protocol ip permit snmp-server community voip RW 1 snmp-server community ext0399 RW 1 snmp-server community sw0399 RW 1 disable-eadi no cdp run ! control-plane ! voice-port 0/2/0:15 ! ccm-manager mgcp ccm-manager music-on-hold ccm-manager config server. ccm-manager config ! mgcp mgcp call-agent. 2427 service-type mgcp version 0.1 mgcp dtmf-relay voip codec all mode out-of-band mgcp rtp unreachable timeout 1000 action notify mgcp modem passthrough voip mode nse mgcp package-capability rtp-package no mgcp package-capability res-package mgcp package-capability sst-package no mgcp package-capability fxr-package mgcp package-capability pre-package no mgcp timer receive-rtcp mgcp sdp simple mgcp fax t38 inhibit mgcp rtp payload-type g726r16 static !
mgcp profile default ! dial-peer cor custom ! dial-peer voice 1 pots service mgcpapp port 0/2/0:15 !
line con 0 exec-timeout 0 0 password 7. logging synchronous login line aux 0 exec-timeout 0 0 password 7. logging synchronous login line vty 0 4 exec-timeout 0 0 password 7.
logging synchronous login ! scheduler allocate ntp clock-period 17180079 ntp server. ! webvpn context Defaultcontext ssl authenticate verify all ! no inservice end cisco-voip mailing list cisco-voip@puck.nether.net cisco-voip mailing list cisco-voip@puck.nether.net - Omar E.P.T - Certified Networking Professionals make better Connections!
Usysnet Corp Open Source Solutions www.usysnet.com.pe -.Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful.
If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. The first line of 'show ccm' output is the full MGCP domain name.
This needs to match what CCM has. Original Message - From: omar parihuana To: Jonathan Charles Cc: cisco-voip@puck.nether.net Sent: Friday, March 2, 2007 2:24:01 PM Subject: Re: cisco-voip 2801 MGCP Gateway on CCM 5.0 Hi, Maybe you can disble ip domain name and use only IP address in CCM and Gateway, with sh ccm you must see the registration. On 3/2/07, Jonathan Charles wrote: In CCM, you need to setup the gateway name as: GW2801.test.br This is your hostname and your ip domain name.
There is no other method. When you say it is 'active' on the gateway, that doesn't correspond to what it should say. If you do a: show ccm you should see it say primary and registered. And then on CCM, click on show endpoints and you should see a 'registered with.'
Jonathan On 2/28/07, alsvrj wrote: Hello All, I have an 2801 connected to a Hicom 330 PBX through a ISDN PRI QSIG with MGCP and a CCM5.0. I´m having a lot of problems to get the gateway registration on CCM. I would like to do some questions: 1- Is it possible to put an ISDN PRI with MGCP using QSIG signaling? Using the show isdn status command I´m seeing MULTIPLEFRAMEESTABILISHED I´m seeing too with the show ccm-manager that the MGCP is Active but I´m not able to see this Gateway into the active state inside of CCM. I´m using a VWIC-1MFT-E1 card to use this ISDN PRI. 2- Is it possible to put the IP Address instead of Domain Name when I´m creating the 2801 Gateway? Hey guys, I really need your help to solve this registration problem, I kindly ask a hand into this situation.
Thanks for everything. It follows below the configuration on the Gateway: hostname GW2801! Boot-start-marker boot system flash c2801-adventerprisek9-mz.124-6.T3.bin boot-end-marker! Logging buffered 4096 informational enable secret 5.! No aaa new-model!
Mailing List Archive: Crypto: Ccm 2016
Resource policy! Clock timezone UTC -3 network-clock-participate wic 2 network-clock-select 1 E1 0/2/0 ip cef!!!! Ip tcp synwait-time 13 no ip domain lookup ip domain name test.br ip name-server.
ip name-server. ip name-server.! Isdn switch-type primary-qsig isdn logging!
Voice-card 0 dsp services dspfarm!! Voice call carrier capacity active!! Voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 bytes 40!!!
Voice class h323 1 h225 timeout tcp establish 3! Crypto configuration! Controller E1 0/2/0 framing NO-CRC4 line-termination 75-ohm pri-group timeslots 1-31 service mgcp!! Interface FastEthernet0/0 ip address.
speed 100 full-duplex no cdp enable h323-gateway voip bind srcaddr.! Interface FastEthernet0/1 no ip address shutdown duplex auto speed auto no cdp enable! Interface Serial0/1/0 no ip address shutdown clock rate 2000000 no cdp enable! Interface Serial0/2/0:15 no ip address no ip proxy-arp encapsulation hdlc isdn switch-type primary-qsig isdn overlap-receiving isdn incoming-voice voice isdn supp-service name calling isdn bind-l3 ccm-manager isdn negotiate-bchan isdn bchan-number-order ascending isdn sending-complete no cdp enable! Ip route 0.0.0.0 0.0.0.0.!! Ip http server ip http secure-server!
Logging. access-list 1 permit.
access-list 1 permit. dialer-list 1 protocol ip permit snmp-server community voip RW 1 snmp-server community ext0399 RW 1 snmp-server community sw0399 RW 1 disable-eadi no cdp run!
Voice-port 0/2/0:15! Ccm-manager mgcp ccm-manager music-on-hold ccm-manager config server.
ccm-manager config! Mgcp mgcp call-agent. 2427 service-type mgcp version 0.1 mgcp dtmf-relay voip codec all mode out-of-band mgcp rtp unreachable timeout 1000 action notify mgcp modem passthrough voip mode nse mgcp package-capability rtp-package no mgcp package-capability res-package mgcp package-capability sst-package no mgcp package-capability fxr-package mgcp package-capability pre-package no mgcp timer receive-rtcp mgcp sdp simple mgcp fax t38 inhibit mgcp rtp payload-type g726r16 static! Mgcp profile default!!
Mailing List Archive: Crypto: Ccms
Dial-peer cor custom!!! Dial-peer voice 1 pots service mgcpapp port 0/2/0:15!!!
Line con 0 exec-timeout 0 0 password 7. logging synchronous login line aux 0 exec-timeout 0 0 password 7. logging synchronous login line vty 0 4 exec-timeout 0 0 password 7. logging synchronous login! Scheduler allocate ntp clock-period 17180079 ntp server.! Webvpn context Defaultcontext ssl authenticate verify all!
No inservice end cisco-voip mailing list cisco-voip@puck.nether.net cisco-voip mailing list cisco-voip@puck.nether.net - Omar E.P.T - Certified Networking Professionals make better Connections! Usysnet Corp Open Source Solutions www.usysnet.com.pe cisco-voip mailing list cisco-voip@puck.nether.net Need Mail bonding? Go to the Yahoo!
Mail Q&A for great tips from Yahoo! Answers users.